Central Hobbies

Orders Only: 1-800-723-5937           Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST

 
0 products in cart | Total: $0.00
 
 

Central Hobbies
1401 Central Avenue
Billings, MT 59102

We Gladly Accept:
Central Hobbies is secured by Comodo SSL
as well as
PayPal Verified Merchant

Part#: EFLA1040B
ELECTRONIC SPEED CONTROL 40 AMP PRO BRUSHLESS
Product Details:

Key Features

Up to 40-amp continuous current with proper air flow, with 55-amp burst current (15 seconds)

5-volt switch-mode BEC circuit capable of 2.5-amp continuous current on any recommended input voltage

Drive up to 7 analog or 6 digital standard-size servos with the BEC on any recommended input voltage

3–6S Li-Po, 9- to 18-cell Ni-Cd/Ni-MH input voltage

Finned heat sinks

Programmable motor braking

Safe power-arm mode prevents accidental starts

Programmable low-voltage cut-off with settings for 3S Li-Po (9V), 4-cell Li-Po (12V), 5-cell Li-Po
(15V), 6-cell Li-Po (18V) or 70% of battery starting voltage

Programmable soft start for helis and airplanes

Auto motor shutdown if signal is lost or there is interference

Programmable timing—5 user-selectable ranges for use with a large variety of brushless motors

Programmable throttle input range (1.1–1.9 ms or 1.2–1.8 ms)

Heli mode for starting the motor with a low speed ratio

Utilizes new smaller MOSFET technology to save weight

Radio system power on/off switch

Pre-wired connectors—E-flite® EC3™ connector on battery input and 3.5mm female gold bullets on
motor output leads

Product Specifications

Brake:    Yes - programmable
Continuous Maximum Current:    40A with reasonable cooling
Input Voltage:    10.8–22.2V
Input Connector Types:    13AWG with E-flite® EC3™ connector
Output Connector Types:    13AWG with 3.5mm female gold bullet connectors
Momentary Peak Current:    55A (15 sec)
Length:    2.70 in (68.6mm)
Width:    1.30 in (33.0mm)
Height:    0.50 in (12.7mm)
Weight:    2.2 oz (62 g)
Wire Gauge:    13AWG


Our Price: $74.99    Sold By: each

Qty Desired:   Add to Cart