Central Hobbies

Orders Only: 1-800-723-5937           Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST

0 products in cart | Total: $0.00

Central Hobbies
1401 Central Avenue
Billings, MT 59102

We Gladly Accept:
Central Hobbies is secured by Comodo SSL
as well as
PayPal Verified Merchant

Part#: FUTS9252
Product Details:

This servo can produce high-current draw from your batteries          
         If using NiMH or LiPo batteries, make sure they are capable           
                        of delivering sufficient amps.                         
FEATURES: Digitally enhanced microprocessors cut about half the response time  
            from transmitter input to servo reaction.                          
          Coreless motor                                                       
          Dual ball bearings on the output shaft                               
          Plastic/nylon gear train                                             
          Moderately high speed                                                
          High current, high capacity wire lead with low resistance            
          Case is made of Black plastic                                        
          Dust and water resistant (Not waterproof)                            
          Works well with all control surfaces on F3C helicopters or precision 
            fixed wing aircraft.                                               
          One year warranty                                                    
INCLUDES: One Digital All Purpose Servo w/Small Round Horn                     
          Four Rectangular Grommets                                            
          Four Brass Bushings                                                  
          Four Mounting Screws                                                 
          One Large Round Horn                                                 
          One Six Arm Horn                                                     
SPECS:    Speed:   0.14 sec/60° @ 4.8V                                         
          Torque:  92 oz-in (6.6 kg-cm) @ 4.8V                                 
          Weight:     1.8oz (50g)                                              
          Power Supply: 4.8V (Futaba does not recommend using 6V)              
          Dimensions: 1.6 x 0.8 x 1.4" (40 x 20 x 37mm)                        
COMMENTS: S9252 Digital Servo Precautions:                                     
          -It is best to avoid long leads and Y-harnesses especially with      
           standard grade wires. If problems are encountered, consider using   
           heavy duty wire such as Futaba's Heavy Duty Series or Hobbico's     
           Pro Series ,minimizing lead lengths, and/or removing Y-harnesses.   
           -Current Drain: Futaba S9252 Servo is specially designed for high-  
            torque and high-speed, therefore very high current drain is        
            normal at startup. For ultimate performance when using this servo, 
            please review the following points.                                
            (1) Always use a 4.8V NiCd battery. Dry cells are rated at 1.5V    
              each making the overall voltage 6V which will damage the gyro.   
            (2) When using systems with the battery fail safe function it has  
              a higher cut-off voltage setting which will cause shorter        
              operation time.                                                  
            (3) When installing the servo please check pushrod linkage to make 
              sure there is no binding in order to prevent excessive power     
              consumption and decrease the life of the motor and battery.      
          When Used With GY501 Gyro:                                           
            Switch the GY501 servo frame rate function (Frm) from "NOR" to     
            "High" to display the performance of the gyro to the fullest.      
            Setting Method:                                                    
            (1) Press the GY501 FUNC+ or - key to call the Servo Frame Rate    
              Setup Screen.                                                    
            (2) Press the DATA+ or - key to display "High".                    
         This digital servo cannot be used with the following * AM *           
               transmitters as the servo neutral signal is: 1310us).           
        CONQUEST AM, FG Series (T4FG, T5FGK,T6FG, T6FGK, T7FGK), New Terratop, 
              T3EGX, T3PGE, T2NL, T2LGX, T2FR, T2PK series.                    
      ****   Otherwise they will work fine with current AM systems  *****      
           An explanation of Coreless motors, a conventional servo motor has a 
             steel core armature wrapped with wire that spins inside the       
             magnets. In a Coreless design, the armature uses a thin wire mesh 
             that forms a cup that spins around the outside of the magnet      
             eliminating the heavy steel core. This design is much lighter     
             resulting in smoother operation and faster response time.

Our Price: $69.99    Sold By: each

Qty Desired:   Add to Cart