Central Hobbies

Orders Only: 1-800-723-5937           Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST

0 products in cart | Total: $0.00

Central Hobbies
1401 Central Avenue
Billings, MT 59102

We Gladly Accept:
Central Hobbies is secured by Comodo SSL
as well as
PayPal Verified Merchant

Part#: FUTS9151
Product Details:

This can only be used with 4.8V batteries. 

This servo can produce high-current draw from your batteries.          
        If using NiMH or LiPo batteries, make sure they are capable            
                       of delivering sufficient amps.                          
FEATURES: Digitally enhanced microprocessors cut about 1/2 of the response     
            time from transmitter input to servo reaction.                     
          Digital operation allows this servo to reach full power immediately  
            and maintain torque longer.                                        
          High-capacity, high-current wire with low resistance                 
          Coreless motor (a wire cage rotates around the magnet).              
          High speed operation for immediate response                          
          Nylon gears                                                          
          Dual ball bearings on the output shaft                               
          Delivers high torque rudder operation for precision fixed-wing F3A   
            pattern aircraft.                                                  
          Dust and water resistant (Not Waterproof)                            
          Black plastic case.                                                  
          One year warranty.                                                   
INCLUDES: One S9151 Digital High Torque Rudder F3A Servo w/Futaba J Connector  
            and a small round servo horn                                       
          Four Rectangular Grommets                                            
          Four Brass Bushings                                                  
          Four 2 x 11mm Mounting Screws                                        
          One Large Round Horn                                                 
          One Six Arm Horn                                                     
          One Four Arm Horn                                                    
SPECS:    Dimensions: 1.6 x 0.8 x 1.4" (40 x 20 x 37mm)                        
          Weight: 1.8oz (50g)                                                  
          Speed: .19 sec/60° @ 4.8V                                            
          Torque: 132 oz-in (9.5 kg-cm) @ 4.8V                                 
          Power Supply: 4.8V (Futaba does NOT recommend using 6V)              
FEATURES: S9151 Digital Servo Precautions,                                     
           -It is best to avoid long leads and Y-harnesses especially with     
            standard grade wires. If problems are encountered, consider using  
            heavy duty wire such as Futaba's Heavy Duty Series or Hobbico's    
            Pro Series, minimizing lead lengths, and/or removing Y-harnesses.  
           -Current Drain: Futaba S9151 Servo is specially designed for high-  
            torque and high-speed, therefore very high current drain is normal 
            at startup. For ultimate performance when using this servo, please 
            review the following points.                                       
            (1) When using systems with the battery fail safe function it has  
              a higher cut-off voltage setting which will cause shorter        
              operation time.                                                  
            (2) When installing the servo please check pushrod linkage to make 
              sure there is no binding in order to prevent excessive power     
              consumption and decrease the life of the motor and battery.      
         This digital servo cannot be used with the following * AM *           
               transmitters as the servo neutral signal is: 1310us).           
        CONQUEST AM, FG Series (T4FG, T5FGK,T6FG, T6FGK, T7FGK), New Terratop, 
              T3EGX, T3PGE, T2NL, T2LGX, T2FR, T2PK series.                    
      ****   Otherwise they will work fine with current AM systems  *****      

Our Price: $99.99    Sold By: each

Qty Desired:   Add to Cart