Central Hobbies

Orders Only: 1-800-723-5937           Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST

0 products in cart | Total: $0.00

Central Hobbies
1401 Central Avenue
Billings, MT 59102

We Gladly Accept:
Central Hobbies is secured by Comodo SSL
as well as
PayPal Verified Merchant

Part#: FUTS3150
Product Details:

Designed for aileron applications on gliders, jets, and electric planes.    
        This servo can produce high-current draw from your batteries.          
        If using NiMH or LiPo batteries, make sure they are capable            
                       of delivering sufficient amps.                          
FEATURES: Coreless motor                                                       
          2 ball bearings                                                      
          Metal gears                                                          
          Digitally enhanced microprocessors cut about half the response time  
            from transmitter input to servo reaction                           
          Dust and water resistant-not water proof                             
          Compact design is especially suited for easy installation inside     
            the wing of smaller gliders, jets and electric planes.             
          Black plastic case                                                   
          One year warranty                                                    
INCLUDES: One S3150 Wing Aileron Digital Servo, one 1" (25mm) star shaped      
            horn, one 1.5mm (39mm) star shaped horn, one 1.8" (45mm) straight  
            arm, one 1.4" (35mm) diameter horn, two each-screws, eyelets, and  
SPECS:    Speed:         .24 sec/60° @ 4.8V                                    
          Torque:       51.4 oz-in @ 4.8V                                      
          Dimensions:   1.2 x 0.4 x 1.1" (30 x 11 x 29mm)                      
          Weight:        .81oz (23g)                                           
          Power Supply: 4.8V (Futaba does NOT recommend using 6V)              
COMMENTS: S3150 Digital Servo Precautions,                                     
           -It is best to avoid long leads and Y-harnesses especially with     
            standard grade wires. If problems are encountered, consider using  
            heavy duty wire such as Futaba's Heavy Duty Series or Hobbico's    
            Pro Series,minimizing lead lengths, and/or removing Y-harnesses.   
           -Current Drain: This Digital Servo is specially designed for high-  
            torque or high-speed, therefore very high current drain is normal  
            at startup. For ultimate performance when using this servo please  
            review the following points.                                       
              1. Radio systems with the Battery Fail Safe function have a      
                 higher cut-off voltage setting which will cause shorter       
                 operation time.                                               
              2. When installing the servo, please check pushrod linkage to    
                 make sure there is no binding in order to prevent excessive   
                 power consumption and decrease the life of the motor and      
             A note on coreless motors: conventional servo motors have a steel   
             core armature wrapped with wire that spins inside the magnets. In 
             a coreless design, the armature uses a thin wire mesh that forms a
             cup that spins around the outside of the magnet eliminating the   
             heavy steel core. This design results in smoother operation and   
             faster response time.                                             
         This digital servo cannot be used with the following * AM *           
               transmitters as the servo neutral signal is: 1310us).           
        CONQUEST AM, FG Series (T4FG, T5FGK,T6FG, T6FGK, T7FGK), New Terratop, 
              T3EGX, T3PGE, T2NL, T2LGX, T2FR, T2PK series.                    
      ****   Otherwise they will work fine with current AM systems  ***** 

Our Price: $59.99    Sold By: each

Qty Desired:   Add to Cart