Central Hobbies

Orders Only: 1-800-723-5937           Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST

 
0 products in cart | Total: $0.00
 
 

Central Hobbies
1401 Central Avenue
Billings, MT 59102

We Gladly Accept:
Central Hobbies is secured by Comodo SSL
as well as
PayPal Verified Merchant

Part#: FUTS3004
SERVO STANDARD BALL BEARING
Product Details:

This basic servo is used in cars, boats, or where standard servos are used.  
   Note: This servo is not designed for use with glow-powered helicopters.     
         This is a replacement for the following servos.(S15)                  
                                                                               
         This servo can produce high-current draw from your batteries.         
          If using NiMH or LiPo batteries, make sure they are capable          
                        of delivering sufficient amps.                         
                                                                               
FEATURES: Single ball bearing on output shaft                                  
          Precise tight fit throughout the geartrain                           
          Being standard size and lightweight, it fits many applications.      
          Three pole motor                                                     
          Nylon gears                                                          
          One year warranty                                                    
                                                                               
INCLUDES: One S3004 standard servo with preinstalled round servo horn(FSH6W)   
          Four brass eyelets                                                   
          Four Black one-piece rectangular rubber grommets (FUTM2348)          
          Four servo mounting screws                                           
          Three servo horns (1 lg. round, 1 lg."X" and 1 sm. "x")              
                                                                               
SPECS:    Speed:   0.23 sec/60° @ 4.8V                                         
                   0.19 sec/60° @ 6.0V                                         
          Torque:  44 oz-in (3.2 kg-cm) at 4.8V                                
                   57 oz-in (4.1 kg-cm) at 6.0V                                
          Dimensions: 1.6 x 0.8 x 1.4" (1-9/16 x 13/16 x 1-7/16")              
            (40 x 20 x 36mm)                                                   
          Weight: 1.3 ounce (1-5/16oz) (37 grams)                              
          Connector: "J" type with approx. 5" wire                             
                                                                               
COMMENTS: inch (millimeters)                                                   
          1.42 (36) bottom to top of case (not output shaft)                   
          .60 (15) flange to top of shaft                                      
          1.0 (25) flange to bottom of servo                                   
          1.59 (40.4) case length {holes on-center 1.93 (49)}                  
          .78 (19.8) case width {holes on-center .39 (10)}  


Our Price: $13.99    Sold By: each

Qty Desired:     Out of Stock