Central Hobbies

Orders Only: 1-800-723-5937           Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST

0 products in cart | Total: $0.00

Central Hobbies
1401 Central Avenue
Billings, MT 59102

We Gladly Accept:
Central Hobbies is secured by Comodo SSL
as well as
PayPal Verified Merchant

Part#: HRC31075S
Product Details:

FEATURES: High torque                                                         
          Travels 180° - full-lock to full-lock - to hold your gear in position
            securely. Not proportional. Perfect for mechanical retract        
          Water resistant                                                     
          Ball bearings                                                       
INCLUDES: Servo w/Universal connector, as well as full set of horns, grommets,
            bushings and mounting screws.                                     
SPECS:    Length: 44mm (1.7")       Weight: 35g (1.23 oz.)                    
          Width:  23mm (0.9")       Torque: 6.6 kg-cm (92 oz-in)              
          Height: 25mm (1.0")       Speed:  0.5 sec/60°                       
COMMENTS: A retract servo is a very specialized servo. It is non-proportional,
            going 180 degrees, "lock to lock". They are specifically made for 
            mechanical retracts to lock the gear in the up and down positions.
            they DO NOT have any means of end point adjustment and can not be 
            adjusted by ATV on a transmitter. They are only able to go 180    
            degrees and provide full maximum available torque at the two end  
            points. This is their whole purpose and intentional design, but if
            someone has a unique design situation where they need other than  
            180 degrees available, then they must use a proportional servo,   
            not a retract servo. They are specifically designed to withstand  
            constant holding loads in the up and down positions, unique to the
            use of mechanical retracts.                                       
            Pneumatic retracts do not need a retract servo. A proportional    
            standard or mini servo is used to move the air valve back and forth
            For Gear set, order HRCM6343

Our Price: $27.99    Sold By: each

Qty Desired:   Add to Cart