Central Hobbies

Orders Only: 1-800-723-5937           Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST

 
0 products in cart | Total: $0.00
 
 

Central Hobbies
1401 Central Avenue
Billings, MT 59102

We Gladly Accept:
Central Hobbies is secured by Comodo SSL
as well as
PayPal Verified Merchant

Part#: MAS1170TP
PROPELLER 3 BLADE PUSHER 11 X 7
Product Details:

FEATURES: Constructed of glass filled nylon for strength and durability       
          NACA airfoil                                                        
          Scale look and true pitch                                           
          Accurately balanced to create a greater thrust at lower RPM         
                                                                              
SPECS:    Diameter: 11" (28cm)                                                
          Pitch:     7" (18cm)                                                
                                                                              
COMMENTS: The general rule for converting a 2 blade prop to a 3 blade is to   
            subtract 1" from Diameter OR subtract 1 from Pitch.               
          Pusher propellers are designed for airplanes that have the engine   
            facing backwards in the rear of the plane, PUSHING the airplane   
            forward.                                                          
                                                                              
          PER MASTER AIRSCREW: All 3- and 4-blade props are balanced          
            dynamically at the factory prior to drilling. The mounting holes  
            are then drilled slightly off center, if required, to properly    
            balance the propeller. As such, the mounting hole may be slightly 
            off center. Master Airscrew assures us this is perfectly normal   
            and will not cause problems during use.


Our Price: $9.49    Sold By: each

Qty Desired:   Add to Cart