Central Hobbies

Orders Only: 1-800-723-5937           Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST

 
0 products in cart | Total: $0.00
 
 

Central Hobbies
1401 Central Avenue
Billings, MT 59102

We Gladly Accept:
Central Hobbies is secured by Comodo SSL
as well as
PayPal Verified Merchant

Part#: BSI210
CENTRAL HOBBIES FINISH-CURE 20 MIN EPOXY 13OZ
Product Details:

FINISH-CURE™ 20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CURE™ can be sanded the easiest of all our epoxies and is excellent for the sheeting of foam core wings. Allow 8 hours for full curing. For best results, FINISH-CURE™ should be heated to a temperature above 85 degrees F or applying light weight fiberglass, lay cloth on balsa first, then brush on FINISH-CURE™. When fully saturated, go over the surface with a heat gun, and then squeegee off excess epoxy with a playing card from an old deck. Heat and remove excess several times for a light weight finish. If room temperature is below 70 degrees F use a heat gun on the surface several times for the next 2 hours. When dry, lightly sand, then fill surface with a low weight spakeling compound, scrapping off excess with a playing card. Sand to a smooth finish ready for primer. For heavy weight fiberglass, apply the epoxy before and after laying down the cloth. FINISH-CURE™ is best mixed in a disposable cup.


Our Price: $29.25    Sold By: each

Qty Desired:   Add to Cart