Orders Only: 1-800-723-5937 Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST
NOTICE: THE U.S. POSTAL SERVICE HAS INSTITUTED A SURCHARGE ON ALL PACKAGES OF 22 INCHES AND LONGER !
22" to 30" long is $4.00 (+SHIPPING & HANDLING CHARGE)
30" and over is $15.00 (+SHIPPING & HANDLING CHARGE)
This is a 36" 4-40 Stainless Steel Pushrod by Sullivan.
FEATURES: 4-40 Stainless Steel Pushrod with Accessories
INCLUDES: One Pushrod (Threaded on One End)
One Red Outer Tube
Two 4-40 Threaded Gold-N-Clevises
Two Retainer Clips
One Rubber Nut
One Solder on Threaded End
SPECS: Length: 36"
Wire Size: 4-40"
This is a .015" nylon coated steel pull-pull cable kit from Sullivan.
Sullivan's kit to add flying wires or tail brace wires to an RC aircraft model.
FEATURES: Includes wires and hardware along w/general installation instructions
INCLUDES: 6 2-56 brass couplers
4 2-26 eyebolts
8 2-56 Clevises
9 Brackets with washers installed
8 feet of .032' stainless steel cable
8 Crimp Loops
8 Feet of .032 Kevlar cable.
8 nuts
8 retaining clips.
Instructions
REQUIRES: Pliers, wire cutters. crimper, 4-40 screws or bolts
COMMENTS: Allows the RC scale modeler to add flying/bracing wires to a model.
Wires can be used to brace wings, tail, landing gear.
This is a quantity of four 2-56 Eyebolts constructed of plated steel with a full 3/8" of thread. Comes with four eyebolts and four nuts from Sullivan.
This is a quantity of four 4-40 eyebolts constructed of plated steel with a full 5/8" of thread. Comes with four eyebolts and four nuts from Sullivan.
Du-Bro Mini Nylon Kwik Link on a .072 diameter 12 rod with 3/4 2-56 thread on one end.
For custom pull-pull or bracing wire designs, this kit includes 30 feet (9,1 M) of Kevlar® Aramid cable and a limited hardware assortment. 100 lb. breaking strength.