Orders Only: 1-800-723-5937 Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST
Central Hobbies
1401 Central Avenue
Billings, MT 59102
We Gladly Accept:
as well as
PUSHRODS / CABLES : PUSH ROD / PULL-PULL SYSTEMS
NOTICE: THE U.S. POSTAL SERVICE HAS INSTITUTED A SURCHARGE ON ALL PACKAGES OF 22 INCHES AND LONGER !
22" to 30" long is $4.00 (+SHIPPING & HANDLING CHARGE)
30" and over is $15.00 (+SHIPPING & HANDLING CHARGE)
- Page 1 of 4 | 47 Total Products
Dubro Kwik Link 12 inch w/clevis
Description:
Dubro Kwik Link 12"
Steel threaded rods 12" long, thread length 3/4", .072" diameter
2-56 steel clevis 1" long
Our Price: $1.77
Dubro Threaded Rod 4-40 12 inch long
Description:
12" long. The diameter is .093" They are strong and bendable. They are threaded only 3/4" on one end with a 4-40 thread size.
Our Price: $1.10
Dubro Threaded Rod 4-40 30 inch
Description:
Steel rods that are 30" long. The diameter is .072"
They are strong and bendable. They are threaded only 3/4" on one end with a 4-40 thread size.
Our Price: $1.25
Dubro 1/2A Strip Aileron Link
Description:
INVENTORY REDUCTION SALE!!!
RETAIL PRICE $3.50
This aileron linkage hookup is made especially for 1/2A high, mid, or low wings
It is light, compact, and easy to install. Features nylon rod ends, mini
Kwik-Links and spring-thread couplers. One per package.
Our Price: $2.10
Dubro Rigging Couplers 2-56 (4)
Description:
DUBRO 2-56 RIGGING COUPLERS These fittings thread into Dubro Steel Kwik-Links and are perfect for cable controls, flying wires and other linkage requirements. 2-56 thread, 7/8'' long with a 1/32'' eye. Plenty strong enough for 1/4 scale applications (four per package).
Our Price: $3.58
Dubro Nickel Steel Strap (4)
Description:
FEATURES
Nickel plated steel construction
Three pre-drilled .108" (approx) holes
INCLUDES
Four straps
SPECIFICATIONS
Length: 1-5/8"
Thickness: 1/16"
These are pre-drilled for 4-40 screws. These fit perfectly into the slotted end of Dubro's #302 & #303 rod ends.
Our Price: $3.25
Dubro Rod Ends Steel 4-40 (2)
Description:
These rods work well as tail bracing, flying wires, aileron connectors on biplanes, strut bracing, and anywhere a solid wire connection is needed.
FEATURES
Solid steel construction
Steel threaded fork for easy adjustments.
Overall length adjustment by crimping wire where desired.
Full mounting hardware included.
INCLUDES
Two 12"x4-40 steel rods
Four fork rod ends
Four mounting straps
Four 4-40x1/4" screws
Four 4-40 nuts
SPECIFICATIONS
Rod length: 304mm (12")
Rod diameter: 2.2mm (.088")
Strap length: 40.7mm (1.602")
Strap width: 6.5mm (.259")
Strap thickness: 1.6mm (.065")
COMMENTS
One end of each steel wire includes a threaded fork shaped coupler. The other end has a coupler that will slide up and down the wire, following the instructions, if you crimp the end of the wire at your desired position, you can cut off the excess, and adjust the length
Our Price: $17.60
Dubro Kwik Link 4-40 12 inch
Description:
This is a Du-Bro 4-40 Kwik Links on 12" Rod.
FEATURES
Complete assembly for any control linkage
Allows easy removal for on-the-field adjustments
Spring steel Kwik Links with spring keepers
INCLUDES
One steel rod and a Kwik Link
SPECIFICATIONS
Rod Length: 12" (305mm)
Rod Diameter: .093" (2.4mm)
Thread Size: 4-40
Our Price: $2.59
PUSHROD METAL PIN STANDARD
Description:
2mm X 260mm (10.25 inch) metal pushrod and plastic clevis with metal pin.
Our Price: $4.49
BALL JOINT PUSH ROD
Description:
2mm X 260mm (10.25 inch) metal pushrod and plastic ball link with meta ball.
Metal ball uses 2mm through bolt.
Our Price: $7.99
PUSHROD FLEXIBLE NYLON 2MM
Description:
This is the 36" (91.4cm) Sullivan Gold-N-Rod Nylon Control Rod Set.
Ideal for elevator, rudder and tailwheel control on aircraft models under 10lbs (4536g).
FEATURES: Flexible, very easy to install and adjust and will last the life of the model.
Temperature stabilized to minimize thermal expansion.
Nonmetallic and fuel proof.
INCLUDES:
Two red sheaths
Two white rods
Four 2mm Gold-N-Clevises with retaining clips
Four 2mm studs
Four clips
One 1" (25mm) section of rubber tubing
REQUIRES:
Cutting to length and attaching clevises according to instructions on back of header card
SPECS:
Length: 36" (91.4cm)
Diameter of Red Outer Sheath: 0.16" (4.2mm)
Stud Diameter: 0.078" (2mm)
Our Price: $17.13
- Page 1 of 4 | 47 Total Products