Orders Only: 1-800-723-5937 Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST
The metal D-625MW is part of our D-Series servo line. All Hitec D-Series servos have been designed using our brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with 3mm hex screw, each D-Series servo brings monster performance never known before in the market.
Performance Specifications | |
Operating Voltage Range (Volts DC) | 4.8V ~ 6.0V ~ 7.4V |
Speed (Second @ 60°) | 0.20 ~ 0.15 ~ 0.13 |
Maximum Torque Range oz. / in. | 87 ~ 122 ~ 139 |
Maximum Torque Range kg. / cm. | 6.3 ~ 8.8 ~ 10.0 |
Current Draw at Idle | 30 mA |
No Load Operating Current Draw | 500 mA |
Stall Current Draw | 2,650 mA |
Dead Band Width | 2 µs |
Physical Specifications | |
Dimensions (Inches) | 1.59 x 0.77 x 1.48 |
Dimensions (Metric) | 40.6 x 19.8 x 37.8 |
Weight (Ounces) | 2.11 |
Weight (Gram) | 57.0 |
Replacing the standard-size HS-5485HB and HS-5495BH servos, the sport class D485HW brings faster response and accuracy to your various radio control needs with D-series high resolution 32-bit technology and wide voltage operation.
Performance Specifications | |
Operating Voltage Range (Volts DC) | 4.8V ~ 7.4V |
Speed (Second @ 60°) | 0.20 ~ 0.15 |
Maximum Torque Range oz. / in. | 72 ~ 104 |
Maximum Torque Range kg. / cm. | 4.8 ~ 7.4 |
Current Draw at Idle | 30 mA |
No Load Operating Current Draw | 320mA |
Stall Current Draw | 1,500mA |
Dead Band Width | N / A |
Physical Specifications | |
Dimensions (Inches) | 1.57 x 0.78 x 1.49 |
Dimensions (Metric) | 39.8 X 19.8 X 38.0 |
Weight (Ounces) | 1.59 |
Weight (Gram) | 45.0 |
Circuit Type | 32 bit Programable Digital |
Motor Type | 3 Pole Cored Carbon Brush |
Gear Material | MK 1st Gear & 3 Karbonite Resin Gears |
Bearing Type | Top Ball Bearing |
Output Shaft (type / Ømm) | 25 / 6 |
This is the HS-485HB Premium Standard Servo from Hitec.
FEATURES:
Ideal for 1/10 scale vehicle steering and throttle applications, .20 -.60 class aircraft, boats and all EP and GP .30-.50 class helis
Karbonite gear train that is four times stronger than standard plastic gears
Three pole motor and single ball bearing output shaft
INCLUDES:
HS-485HB Premium Standard Servo, 0.94" (24mm) diameter round horn,
1.2" (31mm) diameter 4-point horn, 1.3" (34mm) double arm horn,
1.2" (30.5mm) single arm horn, four each rubber grommets, eyelets and mounting screws, universal connector
Ideal for 1/10 scale touring cars, buggies and short course vehicles, helicopters up to .90 size, and sport to high performance aircraft up to 25 percent. Heavy duty metal gears and dual ball bearings Coreless motor. Two year limited warranty through Hitec beginning at date of purchase
Includes:
HS-5565MH Servo with 0.94" (24mm) Round Servo Horn, 1.8" (45mm) Round
Servo Horn, 2.3" (59mm) Double Sided Servo Arm, 1.1" (27mm) Single
Sided Servo Arm, 1.6" (42mm) Four Point Horn, Mounting Hardware and
Instructions
Our new strong and speedy digital HS-5070MH possess the performance qualities necessary for the new class of 42-48 inch performance 3D aircraft and 450-size helicopters. Featuring Hitec’s durable metal gears, cored motors, top ball bearings and Generation 1 circuitry, these new additions to our vast servo family will have all your planes and helis flying with remarkable precision and power. The programmable HS-5070MH delivers an impressive 53 oz.-in. of torque at 7.4 volts. Fast, forceful, fantastic! We Are Hitec!
More Info
Size Category: Minis and Micros
Type: Digital
Torque: 61.10 oz/in (4.4 kg/cm) @ 4.8V, 76.37 oz/in (5.5 kg/cm) @ 6V
Speed: 0.15 sec/60 deg. @ 4.8V, 0.12 sec/60 deg. @ 6V
Length: 1.27 in
Width: 0.66 in
Height: 1.21 in
Weight: 1.12 oz
Bushing Or Bearing: Bearing
Bearing: Dual
Motor Type: 3 Pole
Gear Type: Metal
With its low profile design and strong standing torque, the HS-77BB is a great choice for wing or tail mounting in aircrafts up to 1.20 size. Submarines, boats, cars and trucks can also benefit from this servo’s strength and compact size.
Features
Low Profile Compact Design
High Torque Three-Pole Ferrite Motor
Durable Nylon Gears
Top Ball Bearings
Accessories
Nylon Gear Set | Link |
Plastic Case Set | Link |
Applicable Horns
Increase your performance not your budget with the high voltage, digital HS-5565MH. This premium sport servo features a coreless motor, heavy-duty metal gears and dual ball bearings. Rated at 7.4 volts for 2S LiPo operation, it provides the durability and power your RC hobby demands. The HS-5565MH brings lightning speed and acceleration to your 1/10th scale touring cars, buggies and short course vehicles, helicopters up to .90-size and sport to high performance aircraft up to 25 percent.
Bearing: Dual
Bushing Or Bearing: Bearing
Gear Type: Metal
Motor Type: Coreless
Programmable: Yes
Servo Operating Voltage: 6.0 - 7.4V (HV)
Servo Size Category: Standard
Servo Type: Digital
Speed: 0.11 sec/60 deg @ 6.0V; 0.09 sec/60 deg @ 7.4V
Torque: 153 oz-in (11 kg-cm) @ 6.0V; 194 oz-in (14 kg-cm) @ 7.4V
The metal D-645MW is part of the Hitec D-Series dynamo servo line. All Hitec D-Series servos have been designed using brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with 3mm hex screw, each D-Series servo brings monster performance never known before in the market.
Application: 12-15lb Sport, 3D performance & scale airplanes, 2M & up sailplanes, 600mm electric helis, 50-59 class gas helis, 1:10 scale on/off-road vehicles, 1M & scale sail boats, 1/10 scale power boats
Bearing: Dual
Bushing Or Bearing: Bearing
Current Draw Idle: 30mA
Current Draw Stall: 2,650mA
Gear Type: Metal
Maximum Servo Speed: 0.150-0.199 sec/60*
Maximum Servo Torque: 100-199 oz-in
Motor Type: 3-pole ferrite
Product Weight: 2.11 oz (57.0g)
Programmable: Yes
Servo Operating Voltage: 4.8 - 7.4V (HV)
Servo Size Category: Standard
Servo Type: Digital
Spline Count: 25 Teeth
Wire Gauge: 22 AWG
The powerful high speed HS-625MG is a perfect choice for those applications requiring a fast and strong standard size servo. Utilizing our M/P and metal gear train technology, the HS-625MG is a fantastic sport servo for larger planes and 10th scale sport vehicles.
Bearing: Dual
Bushing Or Bearing: Bearing
Current Draw Idle: 8.8mA @ 4.8V; 9.1mA @ 6.0V
Deadband: 8 microsecond
Gear Type: Metal
Input Voltage: 4.8 - 6.0V
Maximum Servo Torque: 40-99 oz-in
Motor Type: Brushed:
Product Height: 1.48" (38 mm)
Product Length: 1.59" (40 mm)
Product Weight: 1.94oz (55.2g)
Product Width: 0.77" (20 mm)
Programmable: No
Servo Operating Voltage: 4.8 - 6.0V
Servo Size Category: Standard
Servo Speed: 0.18 sec/60 deg @ 4.8V; 0.15 sec/60 deg @ 6V at no load
Servo Type: Analog
Torque: 76.4 oz-in (5.5kg-cm) @ 4.8V; 94.4 oz-in (6.8kg-cm) @ 6V
Wire Gauge: 22 AWG