Orders Only: 1-800-723-5937 Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST
This is a Hitec, Ultra Torque, Metal Gear Servo with a Futaba J, Hitec, JR, and Airtronics-Z Style Connector.
FEATURES:
Three metal gears.
Dual ball bearings.
Metal 1st Gear.
Four adjustable splined horns.
For use with .60 size helicopters, glow or electric cars and boats.
INCLUDES:
One ultra torque servo with 11.5" connector wire.
One white small X-shaped servo horn.
One red Large X-shaped servo horn.
One white adjustable servo horn.
One white offset straight servo horn.
Four 2 x 14mm mounting screws
Four brass eyelets
Four black rubber vibration isolators.
REQUIRES:
Futaba J, Hitec, JR, or Airtronics-Z radio system
SPECS:
Speed: 0.24 sec/60° at 4.8V 0.20 sec/60° at 6.0V
Torque: 106.93 oz-in at 4.8V (7.7 kg-cm) 133.31 oz-in at 6.0V (9.6 kg-cm)
Length: 1.59" (40.6mm)
Width: 0.77" (19.8mm)
Height: 1.48" (37.8mm)
Weight: 2.11oz (60g)
This is the Hitec HS-45HB Premium Feather Micro Servo with connector that fits Futaba, Hitec, JR and Airtronics Z radios.
FEATURES: High impact Karbonite gears with ball bearings
Slim case with 2mm thick mount support
INCLUDES: One Servo with "X" horn and mounting screws
Additional "X" horns and also a long servo horn
SPECS: Size: 23.6 x 9.8 x 22.4mm (.92 x .38 x .88")
Output Torque: 1.0Kg-cm (13.88oz-in) at 4.8Volt
Operating Speed: 0.14 sec/ 60°at 4.8Volt
Weight: 8g (0.28oz)
COMMENTS: For replacement Karbonite gear set order HRCM5025
This is the Hitec HS-65HB Mighty Feather Micro Servo with Universal Futaba J, Hitec S, JR and Airtronics Z Connector.
FEATURES: HS-65HB has long lasting and durable Karbonite gears
One of the slimmest micro servos available
Hitec's most powerful servo in the micro class
The HS-65HB was created for higher performance micro helicopters,
electric Park Flyers, & 1/18 scale cars, and features a top ball-
bearing for long life and positive centering
INCLUDES: (1) HS-65HB Micro Servo
(4) M1.7x7 servo mounting screws
(1) Two-sided servo horn
(1) One-sided servo horn
(1) M1.7x3 servo horn screw
(1) Four-sided servo horn
SPECS: Length: 0.92" (23.6mm)
Width: 0.45" (11.6mm)
Height: 0.94" (24mm)
Weigth: 0.38oz (11.2g)
Speed: 0.14/60° @ 4.8V
Output Torque: 24.99 oz-in @ 4.8V
The HS-322HD Standard Heavy Duty Servo utilizes Hitec’s revolutionary Karbonite gear train which is four times stronger than the standard white nylon gears
FEATURES:
NEW Heavy-duty resin gear train
Nylon bushing
3-pole Ferrite motor
INCLUDES:
One Deluxe Standard servo with nylon bushing.
One white small X-shaped servo horn.
One white adjustable servo horn.
One white offset straight servo horn.
Four brass eyelets.
One white plastic wheel servo horn.
Four black rubber vibration isolators
Four M2x14 mounting screws.
This is a non-ball bearing servo.
Heavy-duty resin gear train
SPECS:
Speed: 0.19 sec/60° at 4.8V 0.15 sec/60° at 6.0V
Torque: 42.00 oz-in at 4.8V 51.00 oz-in at 6.0V
Length: 1.60" (41mm)
Width: 0.80" (20mm)
Height: 1.40" (37mm)
Weight: 1.5oz (43g)
INCLUDES:
One Deluxe Standard servo with nylon bushing.
One white small X-shaped servo horn.
One white adjustable servo horn.
One white offset straight servo horn.
Four brass eyelets.
One white plastic wheel servo horn.
Four black rubber vibration isolators.
Four M2x14 mounting screws.
This is the HS-5055MG Sub Micro Digital Feather Servo from Hitec.
FEATURES: Programmable
Overload protection
Metal gears
Lightweight
Ideal for park flying models, indoor planes, small glider, and micro electric helis
INCLUDES: One Hitec HS-5055MG Micro Digital Feather Servo with preinstalled small X-shaped servo horn and screw
One 28mm straight servo arm
One 31mm servo arm
One 54mm servo arm
One 1.6x3.75mm button head screw
Two 1.7x8mm flanged button head screws
SPECS: Speed: 0.20sec/60° at 4.8V
0.17sec/60° at 6V
Output Torque: 1.3kg-cm (18.05oz-in) at 4.8V
1.6kg-cm (22.20oz-in) at 6V
Weight: 9.5g (0.33oz)
Size: 22.8 x 11.6 x 24mm (0.89 x 0.45 x 0.94in)
This is the HS-5065MG Digital Micro Servo from Hitec with Universal Futaba J, Hitec S, JR and Airtronics Z Connector. Connector is compatible with all modern receivers and wiring accessories.
FEATURES:
Programmable
Ball Bearing
Overload Protection
Metal Gears
Light Weight
For use with Park Flyer Models, Indoor Planes, Small Gliders, Micro Electric Heli and MAV
INCLUDES:
One HS-5065MG digital micro servo
Four screws
Two servo arms
SPECS:
23.6mm x 11.6mm x 24mm (0.92" x 0.45" x 0.94")
Speed @ 4.8V: 0.14sec/60°
Speed @ 6V: 0.11 sec/60°
Torque @ 4.8V: 1.8 kg-cm (24.99 oz-in)
Torque @ 6.0V: 2.2 kg-cm (30.55 oz-in)
Weight: 11.9g (0.42oz)
This is a Hitec Digital, Super Speed, Metal Gear, Programmable Servo that will work with Futaba J, Hitec S, JR, and Airtronics-Z radio systems.
FEATURES: EPA, Speed, Direction, and Fail-Safe Programmable (see COMMENTS).
MOSFET amplifier.
Gold plated contacts.
Three metal gears
Dual ball bearings.
Indirect drive long life potentiometer.
High standing torque.
Watertight and dustproof.
Includes blue aluminum, heat-treated servo arm (see COMMENTS).
Works with fixed winged aircraft and helicopters up to 40 pounds,
1/10th and 1/8th on- or off-road vehicles.
INCLUDES: One digital high torque servo with 12" wire and S/JR/Air-Z connector
One white small X-shaped servo horn.
One red Large X-shaped servo horn.
One white adjustable servo horn.
One white off-set straight servo horn.
One white disc servo horn.
One blue aluminum, heat-treated servo arm horn.
Four 2 x 14mm mounting screws
Four brass eyelets
Four black rubber vibration isolators.
REQUIRES: Hitec, JR and Airtronics-Z radio system
SPECS: Speed: 0.17 sec/60° at 4.8V
Speed: 0.14 sec/60° at 6.0V
Torque: 109.7 oz-in at 4.8V
Torque: 130.53 oz-in at 6.0V
Length: 1.59" (40.6mm)
Width: 0.77" (19.8mm)
Height: 1.48" (37.8mm)
Weight: 2.11oz (60g)
COMMENTS: Programming the failsafe:
In order to program the Fail-Safe on this servo. Modeler will need
to purchase the Hitec field programmer sold separately.
The metal servo horn will fit any Hitec servos that have a "+"
stamped on top of the output shaft.
This is a Hitec Super Torque, Metal Gear, that will work with Futaba J, Hitec S, JR, and Airtronics-Z radio systems.
FEATURES: EPA, Speed, Direction, and Fail-Safe Programmable (see COMMENTS).
MOSFET amplifier.
Gold plated contacts.
Three metal gears
Dual ball bearings.
Indirect drive long life potentiometer.
High standing torque.
Watertight and dustproof.
Includes blue aluminum, heat-treated servo arm (see COMMENTS).
Works with fixed wing aircraft and helicopters up to 40 pounds,
1/10th and 1/8th on- or off-road vehicles.
INCLUDES: One digital high torque servo with 12" wire and S/JR/Air-Z connector
One white small X-shaped servo horn.
One red Large X-shaped servo horn.
One white adjustable servo horn.
One white offset straight servo horn.
One white disc servo horn.
One blue anodized, heat treated servo arm horn.
Four 2 x 14mm mounting screws
Four brass eyelets
Four black rubber vibration isolators.
REQUIRES: Futaba J Hitec, JR, or Airtronics-Z radio system
SPECS: Speed: 0.23 sec/60° at 4.8V
Speed: 0.18 sec/60° at 6.0V
Torque: 143.03 oz-in at 4.8V
Torque: 164.2 oz-in at 6V
Length: 1.59" (40.6mm)
Width: 0.77" (19.8mm)
Height: 1.48" (37.8mm)
Weight: 2.11oz (60g)
COMMENTS: Programming the Fail-Safe:
In order to program the Fail-Safe on this servo. Modeler will need
to purchase the Hitec Field Programmer.
The metal servo horn will fit any Hitec servos that have a "+"
stamped on top of the output shaft.