PROPELLER PATTERN 18.1 X 10W Description:
This is an 18.1x10W Composite Pattern Propeller from APC.
FEATURES: APC props are manufactured using a pultrusion process. This method
causes the fiberglass "fibers" to be oriented axially in 1/2" long
pellets, allowing for a higher fiber (60%) to resin (nylon binder)
density. Providing substantially higher strength and stiffness than
glass filled nylon.
The additional stiffness is beneficial to control of vibration
The higher strength allows the use of thinner cross-sections,
beneficial to weight and aerodynamic efficiency
Single piece propeller
INCLUDES: 18.1x10W Composite Pattern Propeller
REQUIRES: ALL props require balancing (use TOPQ5700)
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)