Orders Only: 1-800-723-5937 Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST
High performance model rocketry that’s a SNAP! The 16 inch Dragonite is the newest addition to the Estes Snaps line of model rockets.
When you don’t have lots of time for building and painting a rocket, this is your best bet. Snap together rockets are perfect for young, new rocketeers.
The Dragonite rocket kit literally “snaps” together in minutes with the uniquely molded plastic fin set. The precolored body tube attaches easily and the die cut decals are a breeze to apply. In just minutes you will have built your first model rocket that looks like it was made by a pro!
As easy as the Dragonite is to assemble, the main feature is the high performance flight profile which can easily reach altitudes over 1,100 feet on standard Estes engines. Recovery of your rocket after each cloud-topping flight is provided by a colorful, 12 inch preassembled parachute.
Mini engine powered and Impressive! A joy to build and fun to fly!
Standing just over 20 inches tall, this mini engine powered rocket packs some punch when launched on an A10-3T. The Sequoia is quick off the launch pad and soars to 350 feet so you better keep your eyes open when it takes off.
Skill Level 2
D Engine powered and a great four fin design rocket! The Red Nova stands 21.6 inches tall and can reach an altitude of 800 feet. Once again, a well designed kit and comes with the standard high quality parts Estes is known for! Precision laser cut wood fins. High quality body tube. Plastic nose cone. Colorful pre-assembled parachute. Impressive waterslide decals.
Length: 21.6 in. (54.9 cm)
Diameter: 1.64 in. (42 mm)
Estimated Weight: 3 oz. (85 g)
Laser cut Wood Fins, Waterslide Decal, 15 in (38.1 cm) Parachute Recovery
Recommended Engines: D12-5 (First Launch), D12-7
Projected Max Altitude: 800 ft. (244 m)
Requires 3/16th in. Maxi Launch Rod (ESTES PN 2244)
Skill Level 1
What a classic! That's what you'll get with the Estes U.S. Army Patriot M-104 rocket that dominated the skies in the past. This 1:10 scale model rocket of the desert hero and mother of all air defense missiles is based on the U.S. Army's M-104 surface-air missile. Blast 600 feet high using the standard Estes engines.
The U.S. Army Patriot M-104, is the best kit to build for your first scale model rocket.
This Desert Storm Veteran features a top notch, two piece body tube, and genuine-looking self-stick decals. It's easy to build and can be finished in a morning or afternoon.
This classic scale model can fly 600 feet high on standard Estes engines and recovers with a 12 inch preassembled parachute. Don't have this one? Get it! It's a scale ARMY classic that every rocketeer should have in his rocket arsenal.
Estes is proud to welcome the newest member of the Bertha rocket family. A sport rocket at its core, this multistage flying model rocket can reach altitudes of 1000 feet! A colorful 18 inch parachute provides a soft landing, so the Boosted Bertha can be quickly prepared for another launch.
Skill Level 1
One of our most extreme, super performance model rockets you can own and can easily be built in one afternoon. Standard engine powered.
How high will a High-Flier go? The answer is OUTTA SIGHT!! No one knows for sure. Or maybe you do?
The Estes Hi-Flier is an ultra high performance model rocket with tons of attitude. Be sure and keep your eye on this stream-lined missile as it climbs to amazing heights over 1,500 feet, (OK we told you) and recovers with a fluorescent orange streamer. Watch it climb and climb and climb and...well, you get the idea!
The Estes Mongoose is the perfect first time building and flying experience for a newbie who wants to try their hand at flying a two stage rocket.
A two stage rocket has two sections of the rocket with the engines stacked or staged one on top of the other. The lower or first stage contains a booster engine that kicks the rocket off the launch pad, and the upper or second stage has a standard engine inserted into it for extreme flight altitude.
Recovery is usually by parachute or streamer. The action is always hot when flying a staged rocket! The Mongoose can be flown as a single stage rocket or add a booster engine and watch this beast soar to astonishing heights of over 1,800 feet.
Standing over 26 inches tall, this highflying rocket will descend back to earth on a colorful preassembled parachute.
Recommended Engines:
Single Stage: A8-3 (First Flight), B4-4, B6-4, C6-5
Two Stage:
Booster B6-0 (First Flight), C6-0.
Upper Stage: A8-5 (First Flight) B6-6, C6-7
The supersonic transport (SST) was the future until dangerously loud sonic booms limited where these marvels could fly. The super-quiet Low-Boom SST could begin a new era of supersonic passenger flights. This highly detailed model rocket kit features laser-cut balsa parts, including realistic under-wing “engines pods” and a parachute recovery.
Recommended Engines: C5-3, C6-3
Projected Max Altitude: 400 ft. (122 m)
Recovery System: 15 in. (38.1 cm) Parachute
Length: 30 in. (76.2 cm)
Diameter: 1.33 in. (34 mm)
Estimated Weight: 3.8 oz. (107.7 g)
Estimated Assembly Time: 6 Hours (painting and glue drying time not included)
Fin Materials: Laser cut wood
Decal Type: Waterslide
The Estes New Shepard is a 1/66th scale model of the Blue Origin New Shepard launch vehicle. It flies to altitude on a C5-3 or C6-3, and is capable of as much as 400 ft. It too, after deploying the capsule, falls through the atmosphere under a large parachute to gently touch down. Like the Blue Origin New Shepard, you can fly the Estes New Shepard again and again.
(ENGINES NOT INCLUDED)
For all you sport scale enthusiasts, this one’s for you! The Estes Bull Pup 12D is a highly detailed version of the USAF AGM-12D Bull Pup air to ground missile. First developed in the 1950s, the Bull Pup was used in combat until the 1970s. Over 30,000 Bull Pups were built and used until it was decommissioned in the mid 80s. If you’re just getting started in scale model rockets, the Bull Pup 12D is a great kit to develop your scale model building skills.
This kit comes with a large diameter, single piece body tube, high quality molded plastic tail and nose cone, laser cut wood fins and authentic full color waterslide decals. Standing 15.6 inches tall, this rocket can pack a ballistic punch by reaching almost 675 feet on standard engines and recovering with a colorful 12 inch pre-assembled parachute.
WHAT YOU NEED TO BUILD: Scissors, pencil, ruler, fine sandpaper, carpenter’s glue, plastic cement, hobby knife, masking tape, primer (white), paint (white) and clear coat (optional). (Tools, construction and finishing supplies not included.)
WHAT YOU NEED TO LAUNCH (sold separately): Estes Porta-Pad II Launch Pad with a 1/8 inch launch rod and Electron Beam Launch Controller, Estes model rocket engines, starters and recovery wadding. Four 1.5V high quality AA alkaline batteries are also required for launch controller (not included).
Get ready for the ultimate XTREME adventure with the Estes XTREME model rocket kit! This rocket is designed for maximum performance, style, and coolness. With precision-shaped swept fins made from durable card stock and an elongated plastic nose cone, XTREME delivers exceptional stability and speed, reaching up to 1600 feet on a single C6-5 engine. Plus, with its fast-return, 24-inch reflective silver streamer, tracking it back to the ground is a breeze.
But that's not all – the Estes XTREME is also easy to build, making it perfect for both novice and experienced rocketeers alike. It comes with everything you need except for construction and finishing supplies and the launch equipment, which are sold separately.
No reason to hesitate! Expand your fleet now with the Estes XTREME Model Rocket and experience the ultimate in altitude and excitement!
THIS IS A DISCONTINUED ITEM AND WILL NO LONGER BE AVAILABLE BY DISTRIBUTOR.
This is the Gnome Mini Model Rocket Kit from Estes®.
Suitable for Ages 10 & Older with Adult Supervision for Those Under 12.
Skill Level E2X - Easy to Assemble Rocket
FEATURES: Single piece, chrome wrapped body tube, a bright blue precolored
one piece fin unit, nose cone and upper launch lug ring
With its simple assembly and precolored parts, it's an excellent
choice for the first time rocketeer
Flights up to 800 feet (244m)
Streamer recovery
Molded plastic fins
Self-stick decals
One year warranty
Detailed illustrated assembly and launching instructions