Orders Only: 1-800-723-5937 Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST
Central Hobbies
1401 Central Avenue
Billings, MT 59102
We Gladly Accept:
as well as
CONTROL LINKAGE : BALL LINKS, CLEVISES, E-Z CONNECTORS
- Page 5 of 7 | 79 Total Products
Dubro Swivel Ball Link 4-40
Description:
This high quality ball link offers smooth, secure operation with less slop.
You'd want to use this on any control surface where accuracy is required (like
the throttle linkage).
Includes: 1- swivel ball link (Black plastic, self-threading for 4-40 rod, 1"
in overall length) with a burnished brass ball pre-installed with
a #4 hole in it
1- 4-40 x 5/8" socket cap screw
1- brass spacer
1- 4-40 steel nut
Requires: 4-40 threaded pushrod
3/32" allen wrench for tightening screw
Our Price: $2.94
Dubro Kwik Grip E/Z Connectors (2)
Description:
This is a Kwik Grip E/Z Connector set by Dubro. EZ Connectors link a pushrod to a servo arm allowing it to pivot for less bind in control surfaces.
FEATURES
Works on 2-56 and smaller wire (.078")
Permanent or snap on mounting push nuts both included.
INCLUDES
Two brass EZ Connectors
Two plastic snap nuts.
Two metal snap nuts.
Two 2.5x3.5mm slotted head screws.
SPECIFICATIONS
Length of brass connector: 10mm (.395")
Diameter of brass connector: 5.5mm (.217")
COMMENTS
These differ from the standard E/Z connectors in that they
have a hex shape for easy tightening.
Our Price: $3.05
Dubro Kwik Grip E/Z Connector Wrench
Description:
This is the Kwik Grip E-Z Connector wrench by Dubro for use with Dubro E-Z connectors.
FEATURES
Polished steel construction.
Long handle for easy gripping.
INCLUDES
One flat bent steel wrench.
SPECIFICATIONS
Length: 97.0mm (3.819")
Width: 9.6mm (.378")
Thickness: 1.4mm (.058")
Our Price: $1.65
Dubro 4-Stroke Throttle Linkage
Description:
4-Stroke Throttle Linkage.Brass, nylon, & steel construction.Easy to install and fully adjustable.
INCLUDES:
One nylon control arm (1.5" long w/4 adjustment holes)
One nylon control arm (1.25" long w/3 adjustment holes)
One nylon ball cup
One steel ball w/nut
One brass bushing
One brass screw lock connector with retainer & 2.6x4mm screw
One flat washer
One 2.6x8mm cap head screw
One 2-56x3-7/8" rod with Z-bend on one end
Our Price: $8.42
Dubro Threaded Couplers 2mm (2)
Description:
These are 2mm threaded couplers that are soldered onto 2mm pushrods or 2mm music wire so that Kwik-Links or ball links may be used These couplers are made of brass and are 1-1/4" long (3/4" of it is threaded).
INCLUDES
Two brass threaded couplers
REQUIREMENTS
Soldering coupler to pushrod
Our Price: $2.37
Dubro Safety Lock Kwik Link 2-56 (2)
Description:
These are 2-56 Safety Lock Kwik-Link Clevis' from Dubro. Used on model aircraft for connecting control rods to control surfaces.
FEATURES
Self tapping design leaves no slop on the pushrod threads.
Square nylon shank for easy installation and adjustment.
10% lighter than a steel clevis.
Brass plated stepped steel pin does not bind on control horns and has a large flat head for easy removal.
Brass plated steel safety lock slides into a groove on the pin for a secure and solid lock.
Safety lock is mounted in a track system on the clevis body to help prevent it from being lost.
INCLUDES
Two 2-56 Safety Lock Kwik-Link Clevis'
Length: 1-1/8"
Width: 5/16"
Shank Width: 3/16"
Our Price: $2.95
Dubro Saftey Lock Kwik Link 2-56 (12)
Description:
These are 2-56 Safety Lock Kwik-Link Clevis' from Dubro. Used on model aircraft for connecting control rods to control surfaces.
Self tapping design leaves no slop on the pushrod threads.
Square nylon shank for easy installation and adjustment.
10% lighter than a steel clevis.
Brass plated stepped steel pin does not bind on control horns and has a large flat head for easy removal.
Brass plated steel safety lock slides into a groove on the pin for a secure and solid lock.
Safety lock is mounted in a track system on the clevis body to help prevent it from being lost.
INCLUDES
Twelve 2-56 Safety Lock Kwik-Link Clevis'
SPECIFICATIONS
Length: 1-1/8"
Width: 5/16"
Shank Width: 3/16"
Our Price: $20.52
Dubro Safety Lock Kwik Link 4-40 (2)
Description:
These are 4-40 Safety Lock Kwik-Link Clevis' from Dubro. Used on model aircraft for connecting control rods to control surfaces.
FEATURES
Self tapping design leaves no slop on the pushrod threads.
Square nylon shank for easy installation and adjustment.
10% lighter than a steel clevis.
Brass plated stepped steel pin does not bind on control horns and has a large flat head for easy removal.
Brass plated steel safety lock slides into a groove on the pin for a secure and solid lock.
Safety lock is mounted in a track system on the clevis body to help prevent it from being lost.
INCLUDES
Two 4-40 Safety Lock Kwik-Link Clevis'
SPECIFICATIONS
Length: 1-1/8"
Width: 5/16"
Our Price: $3.58
Dubro Safety Lock Kwik Link 2mm (2)
Description:
These are 2mm Safety Lock Kwik-Link Clevis' from Dubro. Used on model aircraft for connecting control rods to control surfaces.
Self tapping design leaves no slop on the pushrod threads.
Square nylon shank for easy installation and adjustment.
10% lighter than a steel clevis.
Brass plated stepped steel pin does not bind on control horns and has a large flat head for easy removal.
Brass plated steel safety lock slides into a groove on the pin for a secure and solid lock.
Safety lock is mounted in a track system on the clevis body to help prevent it from being lost.
Two 2mm Safety Lock Kwik-Link Clevis' per package
Length: 1-1/8"
Width: 5/16"
Shank Width: 3/16"
Our Price: $3.25
Dubro Mini E/Z Connectors (2) 3/16 inch
Description:
These are Mini E-Z Connectors for Park Flyers by Dubro.
FEATURES
Aluminum Construction
INCLUDES
Two Connectors
Two Screws
Two Washers
SPECIFICATIONS
Length: 4.8mm (3/16")
Diameter: 3.2mm (1/8")
Weight: 0.25g (0.0088oz)
COMMENTS
Maximum pushrod diameter is .047 - 3/64" (1.22mm)
Our Price: $3.85
Dubro Micro E/Z Link .032 (4)
Description:
This Is The MICRO E/Z Link From Du-Bro
FEATURES
All Plastic Construction
For connecting a .032 pushrod wire to a servo horn or control horn.
INCLUDES
2 (Two) E/Z Link Connectors
REQUIREMENTS
Two (2) 0.032 Pushrods
SPECIFICATIONS
Length: 3/8" (10mm)
Width: 1/8" (3.5mm)
Height: 1/8 "(3.5mm)
COMMENTS
These Will Only Work On Park-Flyer,Indoor Airplanes.
Our Price: $1.85
Dubro E/Z Links .072 (2-56) (4)
Description:
This is the E/Z Link for .072 (2-56) Pushrods from DU-Bro.
FEATURES
All Plastic Construction For connecting a .072 pushrod wire to a servo horn or control horn.
INCLUDES
Four E/Z Link Connectors
REQUIREMENTS
.072 Pushrods
SPECIFICATIONS
Length: 3/4" (19mm)
Width: 3/16" (4.8mm)
Height: 3/8 " (9.5mm)
Our Price: $1.90
- Page 5 of 7 | 79 Total Products