Information and Orders: 1-406-259-9004
Hours: Mon - Sat 10-6 MST
Central Hobbies
1401 Central Avenue
Billings, MT 59102
We Gladly Accept:
as well as
ELECTRIC MOTORS : EFLITE
- Page 2 of 2 | 16 Total Products
Park 480 Brushless Outrunner Motor, 910Kv
Description:
The Park 480 Brushless Outrunner motor is designed to deliver clean and quiet power for 3D park flyers weighing 20 to 30 ounces (565 to 850 grams), scale park flyers weighing 25 to 35 ounces (710 to 990 grams), or models requiring up to 250 watts of power.
- Perfect match for 3D park flyers weighing 20–30 oz (565–850 g)
- Ideal for scale park flyers 25–35 oz (710–990 g)
- Ideal for models requiring up to 250 watts of power
- High-torque, direct-drive alternative to inrunner brushless motors
- Includes mount, prop adapters and mounting hardware
- External rotor design, 4mm shaft can easily be reversed for alternative motor installations
- Slotted 12-pole outrunner design
- Quiet, lightweight operation
- High-quality construction with ball bearings and hardened steel shaft
Needed To Complete:
20A–35A brushless ESC
2S–3S Li-Po or 6- to 10-cell Ni-MH/Ni-CD
10x7–12x6 propeller
Our Price: $57.99
EFLITE Park 370 BL Outrunner,1200Kv with 4mm Hollow Shaft
Description:
E-flite’s latest Park 370 is a brushless outrunner motor that features a 4mm hollow shaft, ideal for use with variable pitch propellers. It’s perfectly designed for electric models equipped with variable-pitch propeller systems, such as the E-flite® ShowStopper VPP system. However, you don’t need a VPP to use this motor—it’s an excellent motor for small 3D airplanes that weigh 7–14 ounces. A motor mount, prop adapter and all hardware are included.
- Ideal for models requiring up to 120 watts of power
- Optimized windings for 3D performance
- High-torque, direct-drive alternative to inrunner brushless motors
- Includes mount, prop adapters and mounting hardware
- 4mm hollow shaft is easily reversed for alternative motor installations
- Excellent motor for small 3D airplanes 7–14 oz (200–400 g)
- Extremely lightweight—just 1.6 ounces
- Ideal for variable pitch props such as the E-flite® Showstopper Variable Pitch Prop System
- External rotor design for better cooling
- High-quality construction with ball bearings
More Info
Our Price: $39.99
EFLITE Power 60 Brushless Outrunner Motor, 470Kv
Description:
Designed for high power applications, this 6S motor is ideal for 60-sized planes, or models that require up to 1800 watts of power.
Quiet, efficient operation
Perfect for 6- to 12-pound (2.7- to 5.4-kilogram) airplanes
High torque, direct drive alternative to brushless inrunner motors
External radial rotor design
Includes mount, prop adapter and mounting hardware
Application: Airplane
Bearings or Bushings: One 6 x 15 x 5mm bearing and two 6 x 12 x 4mm bearings
Connector Type: 4mm Bullet
Idle Current (Io): 2.1A @ 20V
Motor Type: Brushless Sensorless Outrunner
Recommended Prop Range: 15 x 8 - 17 x 7 electric propeller
Recommended Speed Control: 80A brushless
Resistance: 0.02 ohm
RPM/Volt (Kv): 470Kv
Shaft Diameter: 0.24 in (6.0mm)
Size: Replacement for 60-size glow engines
Voltage: 22.2V (6S LiPo, 4400-5000mAh)
Wire Gauge: 14 AWG
Our Price: $126.99
EFLITE Power 60 Brushless Outrunner Motor, 400Kv
Description:
The Power 60 is designed to deliver clean and quiet power for 60-size sport and scale airplanes weighing 6 to 10 pounds (2.7–4.5 kg), 46-size 3D airplanes up to 7 pounds (3.2 kg), or models requiring up to 1200 watts of power. It’s an especially good match for Hangar 9 .60-size warbirds like the Corsair 60 (HAN2575), P-47D Thunderbolt 60 (HAN2975), P-40 Warhawk 60 (HAN2850), P-51 Mustang 60 (HAN2375), P-51 Miss America 60 (HAN2775) and .46-size 3D planes such as the Hangar 9 Funtana 40 (HAN1975) or Seagull Harrier 46 (SEA3025).
Equivalent to a 60-size glow engine for 6 to 10 lb (2.7 to 4.5 kg) airplanes
Ideal for 46-size 3D airplanes up to 7 lb (3.2 kg)
Ideal for models requiring up to 1200 watts of power
High-torque, direct-drive alternative to inrunner brushless motors
Includes mount, prop adapters and mounting hardware
External rotor design—6mm shaft can easily be reversed for alternative motor installations
Slotted 14-pole outrunner design
High-quality construction with ball bearings and hardened steel shaft
Quiet, lightweight operation
NOTE: Not recommended to use with E-flite 80-Amp Pro Switch-Mode ESC (EFLA1080B)
Horizon Hobby recommens the Castle Creations Phoenix 80 for use with this motor.
Our Price: $126.99
- Page 2 of 2 | 16 Total Products