Information and Orders: 1-406-259-9004
Hours: Mon - Sat 10-6 MST
Central Hobbies
1401 Central Avenue
Billings, MT 59102
We Gladly Accept:
as well as
TRAINS : HO GAUGE TRACK, SWITCHES & ACCESSORIES
- Page 1 of 4 | 42 Total Products
KADEE COUPLER PLIERS
Description:
For HO and HOn3 couplers. Adjust trip pins to the correct height by gently squeezing with these specially designed pliers. Curved jaw surfaces prevent kinking of the trip pins when bending or straightening.
Kadee® Quality Products Co. products are not toys and are not intended for children under 14 years old.
Our Price: $19.29
WOODLAND SCENICS Rail Tracker™ Cleaning Kit
Description:
The Rail Tracker cleaning tool actually follows the track and hugs the rail while you clean. This tool makes it easy to clean hard-to-reach areas like inside tunnels, around structures and under power lines.
Kit includes all you need to clean and maintain your track. Package doubles as a tray for storage. Replacement pads available. Designed to work on N, HO, HOn3 and three-rail O scale track.
- Rail Tracker
- Rail Tracker Handle
- Clean Track Solution™ (TT4554) 0.85 fl oz (25.1 mL)
- 2 Maintenance Pads (TT4552)
- 2 Rescue Pads™ (TT4551)
- 4 Cleaning Pads (TT4553)
- 4 Finishing Pads (TT4553)
- Instructions
Our Price: $39.99
TRACK ALIGNMENT GAGE 18 INCH RADIUS
Description:
Slide between rails to correctly gauge rails. Helps in laying, spiking, and joining flexible track sections and rail.
CLEARANCE ITEM
LIMITED QUANTITY AVAILABLE
Our Price: $2.40
KADEE HO #5 Coupler, pack of 10
Description:
The NO.5 Kadee® Magne-Matic® Coupler features a Metal Coupler, #634 Centering Spring.
It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gear box to avoid the possible electrical crossover or shorting that may cause damage. Use an insulated draft gear box or use the very strong plactic isolated #28 Coupler which has the same mounting dimensions as the NO.5 Coupler.
Contains ten pair of NO.5® Metal Universal Kadee® Couplers with phosphor bronze metal Centering Springs.
NOTE: Does not include Draft Gear Boxes or Lids.
Our Price: $22.89
HO EZ 10 FOOT GREEN SWITCH EXTENSION
Description:
Our Price: $15.75
ATLAS HO-CODE 100 REMOTE SNAP SWITCH RIGHT
Description:
These switches have a remote control switch machine attached so you can wire the switch to be "thrown" (changing the direction of the rail), from your control panel, rather than from the switch itself. Comes with a 1/3 18" radius section, making the curved leg equal to an 18" radius section. To add a passing track and siding, simply replace a 9" straight section. When replacing an 18' radius curved section with an Atlas Snap-Switch, add a 1 1/2" straight section to the opposite side.
- 18" Radius Snap-Switches
- Designed for above or under-table switch machine
- Plastic Frog (cannot be powered)
- Cut-outs for rail joiners
Our Price: $32.95
ATLAS HO Super-Flex track 36 inch
Description:
Classic Code 100 flex track designed to easily create custom track designs.
- Simulated black wood ties
- Nickel silver rail
- 36" long
Our Price: $7.25
BACHMANN 9 inch Straight Terminal Rerailer with Wire (HO Sca
Description:
Nickel silver track and gray roadbed; 1/card
The terminal rerailer is connected via terminal wires to a power pack, which provides current to power the layout. In addition to making power connections, the terminal rerailer is also designed to correct derailments that sometimes occur during normal railroad operations. It can also be used to help properly align wheels on the track when first assembling a train for operation. If you want to use the rerailer to help place cars on the track, you should install it so that it is easily accessible. Otherwise, it should be installed after a difficult section of track (turnout, crossing, “S” curve, etc.) where derailments may occur.
Also available in the E-Z Track® system is a 9” Straight Rerailer if you need a rerailer but do not need to make power connections.
Our Price: $11.99
Bachmann HO 22 inch radius curve EZ track
Description:
Steel alloy track with black roadbed; 4/card
22” radius curved track is best used to make relatively wide railroad curves.
This track accommodates longer HO locomotives and rolling stock, and permits mainline operation at higher speeds.
It can be placed on the outside of 18” radius curved E-Z Track® for double-track mainline realism. Four pieces of track make up one quarter (90 degrees) of a 44” diameter circle. Also available in bulk.
Our Price: $13.75
BACHMANN HO EZ TRACK CONNECTOR SET
Description:
Our Price: $24.99
BACHMANN HO 9 inch straight rerailer track
Description:
Steel alloy track with black roadbed, HO
The terminal rerailer is connected via terminal wires to a power pack, which provides current to power the layout. In addition to making power connections, the terminal rerailer is designed to correct derailments that sometimes occur during normal railroad operations. It can also be used to help properly align wheels on the track when assembling a train for operation. If you want to use the rerailer to help place cars on the track, you should install it so that it is easily accessible. Otherwise, it should be installed after a difficult section of track (turnout, crossing, “S” curve, etc.) where derailments may occur.
Also available in the E-Z Track® system is a 9” Straight Rerailer (Steel Alloy) if you need a rerailer but do not need to make power connections.
Our Price: $11.99
BACHMANN 9 INCH STRAIGHT TRACK
Description:
Steel alloy track with black roadbed; 4/card
Four pieces of 9” Straight Track build 36” of railroad.
Our Price: $12.50
- Page 1 of 4 | 42 Total Products