Central Hobbies

Orders Only: 1-800-723-5937           Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST

 
0 products in cart | Total: $0.00
 
 

Central Hobbies
1401 Central Avenue
Billings, MT 59102

We Gladly Accept:
Central Hobbies is secured by Comodo SSL
as well as
PayPal Verified Merchant

TOOLS : MOTO TOOL ACCESSORIES


  • Page 5 of 5  |  59 Total Products





Part#: ROB460C
CARBIDE CUTTER CONE COARSE
Description:


This Is A Rough 'n Tough Carbide Cutter (Coarse Cone) from Robart.

More Info
Our Price: $9.33    Sold By: each
Qty Desired:   Add to Cart
 



Part#: ROB460F
CARBIDE CUTTER CONE FINE
Description:


This Is A Rough 'n Tough Carbide Cutter (Fine Cone) from Robart. 

More Info
Our Price: $9.33    Sold By: each
Qty Desired:   Add to Cart
 



Part#: ROB463C
CARBIDE CUTTER 1/4" ROD COARSE
Description:


This is a Rough 'n Tough Carbide Cutter (Coarse Rod) from Robart.   

More Info
Our Price: $9.33    Sold By: each
Qty Desired:   Add to Cart
 



Part#: ROB463F
CARBIDE CUTTER 1/4
Description:


This is a Rough 'n Tough Carbide Cutter (Fine Rod) from Robart.

More Info
Our Price: $9.95    Sold By: each
Qty Desired:   Add to Cart
 



Part#: ROB464C
CARBIDE CUTTER 1/8" ROD COARSE
Description:


This is a Rough 'n Tough Carbide Cutter (Coarse Rod) from Robart.   

More Info
Our Price: $9.95    Sold By: each
Qty Desired:   Add to Cart
 



Part#: ROB464F
CARBIDE CUTTER 1/8" ROD FINE
Description:


This is a Rough 'n Tough Carbide Cutter (Fine Rod) from Robart

More Info
Our Price: $9.95    Sold By: each
Qty Desired:   Add to Cart
 



Part#: ROB466F
CARBIDE CUTTER COMBO PACK FINE (6)
Description:


This is the Carbide Cutter Combo Pack Fine (6) from Robart.

More Info
Our Price: $50.00    Sold By: each
Qty Desired:   Add to Cart
 



Part#: DUB352
Dubro Cut-Off Wheels 1-1/4" (2)
Description:


This is a package of Two 1-1/4" Cut Off Wheels from Dubro.

More Info
Our Price: $3.75    Sold By: each
Qty Desired:   Add to Cart
 



Part#: GYR1142002
FIBER DISK ST (Set of 2)
Description:


  • 2" Diameter
  • 3/64" Thickness
  • 1/8" Center Hole
  • Maximum Speed:  30,000 RPM  
  • Package Includes - (2) Fiber Disks & (2) Washers

The Gyros Fiber Disks ST are abrasive cut off wheels specifically formulated to cleanly and smoothly cut Super Tensile-Strength materials such as hard ferrous & non ferrous metals, stainless steel, titanium, high nickel alloys and high carbon/high chrome materials, etc. Sharp cutting action produces a clean, smooth finish. The fiberglass-reinforced structure gives our cut off wheels unsurpassed strength and flexibility making them long lasting and resistant to breakage. Designed specifically for use in all motorized rotating hand tools, our ultra sharp abrasive wheels optimize the low torque supplied by those tools found in just about every tool box. These abrasive grinding wheels will stand up to prolonged use with minimum sparking, no premature wear, and without overheating parts being cut.


Our Price: $7.25    Sold By: each
Qty Desired:   Add to Cart
 



Part#: DRE84922
3/16 Silocone Carbide Grind Stone
Description:


Dremel silicon carbide Grinding Stone. Designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals. Two stones included.

  • Ideal for sharpening, deburring and general purpose grinding on harder materials
  • Designed to work well on stone, glass, ceramic, porcelain, gemstones and non-ferrous metals
  • Specially designed for working with conic and flat surfaces
  • Great for grinding and etching

Our Price: $4.99    Sold By: each
Qty Desired:   Add to Cart
 



Part#: DRE9904
Tunsten Carbide Cutter
Description:


Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials. Materials include hardened and stainless steel, cast iron, hardwoods, nonferrous metals, fired ceramics and especially hard plastics. 3/32“ (2.38mm) tip diameter.

  • Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods
  • A high-speed cutter made of tungsten carbide, the hardest material next to diamonds
  • Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics
  • Use the sides of the cutter (rather than the tip) for effective cutting

Our Price: $10.87    Sold By: each
Qty Desired:   Add to Cart
 
  • Page 5 of 5  |  59 Total Products