Orders Only: 1-800-723-5937 Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST
7x5 G/F Series Propeller from Master Airscrew. Made of glass-filled nylon for strength and durability.
More Info7x6 G/F Series Propeller from Master Airscrew. Made of glass-filled nylon for strength and durability.
More Info8x4 G/F Series Propeller from Master Airscrew. Made of glass-filled nylon for strength and durability.
More InfoThis is a Master Airscrew 8x5 Nylon Prop for Electric Motors.
More InfoThis is a Master Airscrew 8x7 Injection-Molded Fiberglass Filled Nylon Propeller.
9x6 G/F Series Propeller from Master Airscrew - Now with narrower blades for a bit more rpm. Made of glass-filled nylon for strength and durability.
Product Specifications:
Weight is approx. 14.5 grams;
hub thickness is 0.4375 or 7/16";
hole is 1/4" and piloted 5/16" for easy reaming.
10x4 G/F Series Propeller from Master Airscrew; made of glass-filled nylon for strength and durability.
Product Specifications: Weight is approx. 21 grams; Hub thickness is 0.5 or 1/2"; hole size is 1/4" and piloted 5/16" for easy reaming.
This is the 10x5 3-Blade Propeller from Master Aircscrew.
Constructed of glass filled nylon
Provides greater thrust at lower RPMs
Accurately balanced
True scale appearance
INCLUDES:
10x5 3-Blade Propeller from Master Aircscrew
SPECS:
Length: 10" (25cm)
Pitch: 5" (13cm)
Hole Diameter: 0.25" (6.4mm)
COMMENTS:
Avoid high RPM aerobatic manuevers.
When converting from two-blade propellers to three-blade, decrease diameter by 1" and increase pitch by 1" to find proper three-blade size.
Use only a "chicken stick" or electric starter to start engine, then make adjustments from behind engine.
Keep spectators at least 20ft (6.1m) from and out of the path of a rotating propeller.
To stop engine, cut off fuel supply. Do not stop propeller with hand or other object.
This is a 10x6 Airplane Propeller that is a "pusher" Prop from Master Airscrew
FEATURES:
Computer-optimized design gives these props a thinner profile and more "bite" with less noise
Lightweight molded nylon construction reduces rotating mass for higher output and longer life
Reinforcing carbon fibers help maintain true, constant pitch at any RPM.
Length: 10"
Pitch: 6"
Thickness at hub: 1/2"
Hole diameter: 1/4"
10x7 G/F Series Propeller from Master Airscrew. Made of glass-filled nylon for strength and durability.
More Info11x4 G/F Series Propeller from Master Airscrew made of glass-filled nylon for strength and durability.
Product Specifications: Weight is approx. 26 grams; hub thickness is 0.50 or 1/2"; hole size is 1/4" and piloted to 5/16" for easy reaming.
11x7 G/F Series Propeller from Master Airscrew. Made of glass-filled nylon for strength and durability.
Product Specifications:
Weight is approx. 26 grams;
hub thickness is 0.5 or 1/2";
hole size is 1/4" and piloted to 5/16 for easy reaming.