Features of the S3001 are its low profile design, SMT assembly and ball bearing supported output shaft.

Additional features of the 3001 are a shock and vibration resistant potentiometer, custom Futaba IC, through-the-hole circuit board and thick-plated mini connectors.

Operating Voltage: 4.8-6.0 Volts
Operating Speed (4.8V): 0.28sec/60 degrees at no load
Operating Speed (6.0V): 0.22sec/60 degrees at no load
Stall Torque (4.8V): 33.3 oz/in.
Stall Torque (6.0V): 41.6 oz/in.

Motor Type: 3 Pole Ferrite
Potentiometer Drive: Indirect Drive
Bearing Type: Ball Bearing
Gear Type: All Nylon Gears
Connector Wire Length: 11.8"  (300mm)