|
|
|
|
 |
Du-Bro RC Micro
Pushrod Guide
Versatile guide/support for control linkage,
throttle, etc. 3 holes to accommodate different set-ups. The
Micro Pushrod Guide can be used on foam, wood, etc. Just press
pins through foam, then cement with
CA or
epoxy and cut off protruding pins. On balsa, pre-drill small
holes. Guide holes are 0.080 inches diameter. |
|
Du-Bro RC Micro
Pushrod Guide |
|
|
|
| |
|
|
 |
Du-Bro RC Micro Servo Mount (2 sets/pk)
Versatile servo mounting system for micro servos.
Super lightweight, durable servo mounts work on foam, wood, etc.
Install by drilling small hole and using
CA glue. The servo can then be mounted using double-sided tape
(provided) or screws (provided) for a permanent mount. Servo mounts
are made of ABS plastic and are secured with locking back-up plates.
Package contains mount sets for two servos. |
|
Du-Bro RC Micro Servo Mount
(2 sets/pk) |
|
|
|
| |
|
|
 |
Du-Bro RC Micro Servo Arm XL
(for Futaba 3108M, Hitec HS-50/HS-55, E-Flite S75 &
More)
Servo arms long enough for the extra throw needed on
the electric 3D airplanes! Micro Servo Arm XL includes
(4) single arms & (2) double arms. Made with special attention to
weight, strength and performance. Lightweight 100% virgin nylon arms
stand up to the stress of 3D aerobatics. Each arm measures 1"
from center to outer edge. Comes in (4) different versions to
accommodate various micro servos on the market. (See below.) |
|
Du-Bro RC Micro Servo Arm XL
(for Futaba 3108M, Hitec HS-50/HS-55, E-Flite S75 &
More) |
|
|
|
| |
|
|
 |
Du-Bro RC Micro Servo Arm XL
(for JR 241, JR281)
See the description above. This set is specifically
designed for JR micro
servos JR 241 & JR 281. |
|
Du-Bro RC Micro Servo Arm XL
(JR 241, JR281) |
|
|
|
| |
|
|
 |
Du-Bro RC Micro Servo Arm XL
(for GWS Narrow / Standard, MPI MX-50 & Others)
Same description as Micro Servo Arms above.
This set made specifically to fit GWS Narrow / Standard, MPI MX-50 &
Others. |
|
Du-Bro RC Micro Servo Arm XL
(GWS Narrow / Standard, MPI MX-50 & Others) |
|
|
|
| |
|
|
 |
Du-Bro RC Micro Servo
Arm XL (for Bluebird 303, MPI MX-30)
Same description as Micro Servo Arms above.
This set made specifically to fit Bluebird 303 & MPI MX-30.
|
|
Du-Bro RC Micro Servo Arm XL
(for Bluebird 303, MPI MX-30) |
|
|
|
| |
|
|
 |
Du-Bro Mini Lite Wheels
Size: 1"
Sold in pairs,
Mini Lite Wheels are
light & feature a 2-piece press together hub and a super light foam
wheel. Comes standard with .047 axle hole and can be drilled out for
larger diameter axles. |
|
DuBro 1" Mini Lite Wheels |
|
|
|
| |
|
|
|
|
Du-Bro Mini Lite Wheels
Size: 1-1/4"
Sold in pairs,
Mini Lite Wheels are
light & feature a 2-piece press together hub and a super light foam
wheel. Comes standard with .047 axle hole and can be drilled out for
larger diameter axles. |
|
Du-Bro Mini Lite Wheels
1-1/4" |
|
|
|
| |
|
|
|
|
Du-Bro 1-1/2" Mini Lite Wheels
(1 Pair)
Sold in pairs,
Mini Lite Wheels are
light & feature a 2-piece press together hub and a super light foam
wheel. Comes standard with .047 axle hole and can be drilled out for
larger diameter axles. |
|
Du-Bro
1-1/2" Mini Lite Wheels |
|
|
|
| |
|
|
 |
Du-Bro RC 1-1/2" Micro Lite Wheels (2)
Micro Lite Wheels are available in 3 sizes:
1-1/2"(38mm), 2" (51mm) and 2-1/2" (64mm). They feature a one piece
design, with polished spokes and flat black wheel (no O-Rings to
come off rim). Complete with 2 sets of wheel retainers & wide axle
hub for a true running wheel. Perfect for indoor and park flyers. |
|
Du-Bro RC 1-1/2" Micro Lite Wheels (2)
|
|
|
|
| |
|
|
