|
|
|
|
 |
Du-Bro RC Micro Tail Wheel Bracket
Now your tail dragger can have a tail wheel bracket.
The two piece bracket simply glues together to secure pre-bent 1/32
(.032) wire tail wheel strut. Ideal for use with DU-BRO Micro Tail
Wheels. |
|
Du-Bro
RC Micro Tail Wheel Bracket
DUB854 $1.25 |
|
|
|
| |
|
|
 |
Du-Bro RC Micro Wheel Retainer (.047)
Simply Press Micro Wheel Retainers on axle (.047) to
securely hold wheel in place. (8/pk) |
|
RC Micro Wheel Retainer
(.047)
DUB868 $1.00 |
|
|
|
| |
|
|
 |
Du-Bro RC Mini E/Z Connector (12/pkg.)
Ideal for park flyers. Get the same Du-Bro quality
only in a mini size. Light weight aluminum design allows for up to
.047 wire. 2-56 machine screw securely locks wire into place.
Press fit our Mini E/Z Connectors into Mini Servo Arms and secure
with snap washer. |
|
RC Mini E/Z
Connector (12/pk)
DUB915 $16.00 |
|
|
|
| |
|
|
 |
Du-Bro RC Electric Flyer Hinge Tape (15ft/pk)
Our Electric Flyer Hinge Tape has great adhesion
characteristics and is easy to remove. In addition, our hinge tape
will not leave residue. |
|
Du-Bro RC Electric Flyer Hinge Tape (15ft/pk)
DUB916 $5.25 |
|
|
|
| |
|
|
 |
Du-Bro RC Micro Clevis for – .032 (2/pk)
Micro Clevis comes complete with removable .031
L-shaped clevis pins. The silicone tubing securely holds pin in
place. Includes threaded coupler for .032 wire (see Micro2 for .047 below), which can be soldered or glued with cyanoacrylate.
Extra pins included in package. |
|
Du-Bro RC Micro Clevis for
– .032 (2/pk) DUB917 $3.10 |
|
|
|
| |
|
|
 |
RC Micro Clevis Replacement Pins (12/pk)
Replacement pins for Micro Clevis (above) &
Micro2 Clevis (below). |
|
RC Micro Clevis Replacement Pins (12/pk)
DUB918 $1.50 |
|
|
|
| |
|
|
 |
Du-Bro RC Micro2 Control Horn (2/pk)
Micro2 Control Horn is 5/8 inch in height and is
great for the larger scale micro aircraft. |
|
Du-Bro RC Micro2 Control Horn (2/pk)
DUB919 $1.26 |
|
|
|
| |
|
|
 |
Du-Bro RC Micro2 E/Z Link (for .047) (4/pk)
Snap fit on .047 wire, simply bend 90¼ angle on
pushrod and install E/Z Link onto pushrod (No Z/Bend required).
Super lightweight design, ideal for indoor and park flyers. |
|
Micro2 E/Z Link (for .047)
(2/pk)
DUB920 $1.25 |
|
|
|
| |
|
|
 |
Du-Bro RC Micro2 Clevis (for .047) (2/pk)
Micro2 Clevis comes complete with removable .031
L-shaped clevis pins. The silicone tubing securely holds pin in
place. Includes threaded coupler for .047 wire, which can be
soldered or glued with cyanoacrylate. Extra pins included in
package. (See Micro Clevis for .032 above) |
|
Micro2 Clevis (for .047)
DUB921 $3.25 |
|
|
|
| |
|
|
 |
Du-Bro RC 30" Micro2 Pushrod System
(2/pkg.)
Micro Pushrod Systems come complete with (2) 3/64Ó
(.047) pushrods, (2) pushrod housings, (2) Micro2 E/Z Links (90¼
bend is already on pushrods) and (2) Mini E/Z Connectors. |
|
Du-Bro RC 30" Micro2 Pushrod Sys.
DUB922 $6.55 |
|
|
|
| |
|
|
 |
Du-Bro RC Micro
Pushrod Guide
Versatile guide/support for control linkage,
throttle, etc. 3 holes to accommodate different set-ups. The
Micro Pushrod Guide can be used on foam, wood, etc. Just press
pins through foam, then cement with
CA or
epoxy and cut off protruding pins. On balsa, pre-drill small
holes. Guide holes are 0.080 inches diameter. |
|
Du-Bro RC Micro
Pushrod Guide
DUB923 $1.30 |
|
|
|
