These are the strongest and lightest control horns available in the world. The dimension given is the distance from the base of the horn, up to where the thread starts.

Note: The control surfaces of pattern and other aerobatic planes are often too thick for the supplied mounting screw.  SUGGESTION: Use the Central Hobbies 3mm x 30mm Mounting Screws to mount MK & other control horns.  (Order the screws at the bottom of this page.)

MKD0803
Aluminum Horn Set Large   1"  $4.59

MKD0804
Aluminum Horn Set Med 3/4"   $5.19

MKD0805
Aluminum Horn Small 5/16"   $4.59

MKD0815
Offset Aluminum horn (med) 3/4"   $7.29

These place the "point of rotation" over the hinge line!

MKD0816
Offset Aluminum Horn (small) 5/16"  Can be used on the rudder in a "pull pull" set up and through bolted, instead of using the ply plate.     $5.80

MKD Rudder Horn

Sold in pairs.  These are typically used in rudder pull-pull setups.

MKD Rudder Horn       #MKD0812     $1.99