BackHomeSearchHELP!!Shipping Specials CatalogContactFax Shopping cart

  Tech Info: 1-406-259-9004    To Order Call 1-800-723-5937    Mon–Sat 10-6 MST 

Adhesives

Batteries/Chargers

Building Materials

Control Linkage

Dubro RC products

Electrical
Engines & Acc.

Exhaust System

Fuel Accessories

Hatch Accessories

Glow Plug Gear

Instructional
Metric Conversion

Landing Gear

Mounts

Pattern Flyer Tools

Pushrods

Props
Radios & Servos

Spinners

Tools

 

 

 

 

ACCESSORIES 

301

 Extender Tip

BSI301

For use over BSI's standard #312 top. Can be used with all thicknesses of CA except IC-Gel. The flexible tip can be cut to the length and/or inside diameter that is needed for a particular application.

 

$1.49

  302

Extra Fine Extender Tip

BSI302

For use over the standard #312 top, it allows BSI's thin CAs (Insta-Cure, Insta-Flex and Super-Gold) to be applied a drop at a time. Thin CA tends to run everywhere, so these allow precise application.

 

$2.65

 

303

Extra Long Extender Tip

BSI303

For use over the standard #312 top, they provide a rigid tip with extended length to get thin and gap filling CA into hard to reach areas. They are very resistant to clogging and can be cleaned by soaking in acetone.


$.25 each

 

 

  304

Pocket CA Extender Tip

BSI304

For use with BSI's Pocket CAs. It slips over the tip of the Pocket CA top to allow for finer application of the CA. With the tip, the CA can be applied to confined areas.


$1.49 each

305

Teflon Tubing 2'

BSI305

Two foot length of tubing can be cut off to any length (usually 2"). With one end cut at a 45° angle, can be inserted 1/8" into Pocket CA top and into #312 top if it is cut down an additional 3/64". For thin CA.

 

$1.49

  312

Extra CA Top

BSI312

Replacement top that is on all of BSI's non-Pocket CAs. Tops can be soaked in acetone overnight to remove any buildup of CA on the inside and outside of the nozzle.


$.49 each

321

CA Applicator

BSI321

Regular Tip Non-clog 6" long pipette for the application of gap filling and extra-thick CA. CA is sucked up into the applicator by inserting it into an open CA bottle with the bulb at the end compressed, like an eyedropper.

 

$.49

  321

CA Applicator

BSI322

Fine Tip Non-clog 6" long pipette for the application of thin CAs. Can also be used for the fine application of Insta-Set accelerator and for applying fine lubricating oils. CA can be kept in the applicator for two weeks.  


$.49 each

DUB345 Dubro Epoxy Brushes

Dubro Epoxy Brushes

DUB345 (6)

$1.84

   

 

 

Central Hobbies
Copyright 2008 Prices Subject to Change Without Notice
02/27/12


Click Here for Product or Order Information
Click here for Website Comments/SuggestionsWebmaster.