|
If you're serious about building, then you
already know that PermaGrit Tools are the best for sanding,
shaping, and filing. These are not the run-of-the mill tools.
PermaGrit Tools are designed for Aircraft Builders, Woodcarvers,
Model Makers, Miniaturists, Schools, and DIY enthusiasts. Cut, sand and
shape Hardwoods, Softwoods, Plastics, Fiberglass, Carbon Fiber, Tiles,
Bricks, Ceramics, Glass, White Foam, Blue Foam etc. Tools can be cleaned
with any solvent and will last for years!
The Tungsten Carbide grit (one of the hardest materials next to
diamond) is metallurgically bonded to steel. Tools cut, sand and shape
quickly without chipping or losing their edge. Available in coarse or fine
grit.
Use Permagrit Tools on WOODS, PLASTICS, PERSPEX, PLEXI-GLASS, CARBON FIBER, FIBERGLASS,
KEVLAR, BRICK, STONE, FOAM, CERAMICS, GLASS, ALUMINUM, etc
Perma-Grit Tools have been used for many years by a wide range
of people. They're useful for general jobs around the home as well as
specialist trades and hobbies. The tools are available in coarse (60) grit,
and fine (120) grit. The grit spacing is such that the tools will not clog
with general use. However, they can be cleaned
easily using any solvent or paint remover. This will not damage
the cutting surface, as the tungsten is welded to the steel base.
Perma-Grit Tools are recommended by the Dynamic Wing Company
(USA) who produce pressure molded, carbon reinforced canard, wings with
winglets, wing root ribs, and control wells for Velocity Aircraft.
In the
Press —
Flyer Magazine: "We were very taken by the tools produced by Perma-Grit,
so we got in a good selection. They work excellently on both foam stock and
cured epoxy/glass layups, and we have no hesitation in recommending them. If
they become clogged (say with paint), you simply wash them off with
thinners. What can we say? Magic! Get some, it will make things
easier!"
|
