|
|
|
HOBBICO
MK-III Digital
Voltmeter |
|
 |
Use the built-in load to
simulate actual R/C conditions for testing 4-, 5- and 8-cell batteries—or
de-activate the load to use as a true DC voltmeter.
Measures DC voltage up to 19.99
volts, making it versatile enough for any DC battery—including
transmitter/receiver packs, starter batteries and glow batteries.
Twin banana jacks allow for easy
connection to a wide variety of test leads.
Comes with a 9V internal battery
that's located inside an easy-access compartment.
An auto-timer shuts the unit off
automatically if left on by accident, to help prevent unwanted battery drain |
|
#HCAP
0356 Retail Price: $24.99
Our Price:
$24.99
|
|
Battery Checker Liion Lipo LiFe NiCd NiMH FUTM4166
-
Quickly and clearly displays the
voltage levels of your battery packs.
-
Total voltage and remaining
capacity are shown on a bar graph and as a percentage.
-
Can check 2-7 cell LiFe, LiPo and
Li-Ion packs, as well as 4-7 cell NiCd and NiMH packs.
-
Voltage of each cell of a lithium
battery pack can also be displayed.
-
Operates on power supplied by the
connected battery.
-
Know BEFORE you go just how much
battery life you have!
|
SPECIFICATIONS
Stock Number: FUTM4166
Voltage Display Error: +/- 1.5%
Dimensions: 3.3 x 2.5 x 0.6 in (85 x 63 x 15 mm)
Weight: 1.8 oz (52.6 g)
Total Voltage (Ni type): 4.0-17V
Total Voltage (Li type): 5-34V
Cell Voltage (Li type): 1.1-4.9V
Operating Temperature: -10 to +45°C
Storage Temperature: -20 to +60°C |
|
FUTM4166 Retail Price: $59.99
Our Price:
$49.99
|
| Other voltmeters may
have LCD technology, but none of them utilize it as effectively as
the MARK-III Digital Voltmeter. With just a touch of
your finger, all of the important information you need is spelled
out clearly on the custom-designed readout—including "OK" and
"RECHARGE" status indicators when checking battery packs (a key
convenience feature). Also displayed are input settings for either
4.8V, 6.0V or 9.6V packs and easy-to-read 1/2-inch high voltage
measurements. The screen also alerts you to low internal battery
power and negative polarity situations. It's all of the practical
features you want, in a comfortable, uncluttered design! |
|
|
Hangar 9 Digital Variable Load
Voltmeter |
|
|
-
Monitors battery voltage before flight
-
Three selectable loads: .5A, 1A or 2A
-
Accurate digital LCD readout displays both
current load and real-time voltage
-
Works on 4 -8-cell packs
-
Universal lead
|
|
HAN171 Retail Price: $49.99
Our Price:
$39.99
|
|
Hangar 9 Digital Servo &
Receiver
Current Meter
 |
Hangar 9’s new Digital
Servo and Receiver Current Meter lets modelers check
current flow between multiple linkages. It will monitor
overall voltage between the battery and receiver, charge
current between the charger and charge jack, or current
draw when used between the receiver and servo. Modelers
can even monitor discharge current between the charge
jack and battery cycler. All voltage information is
displayed on the easy-to-read digital display and can be
switched between volts or amps. The unit comes wired
with universal connectors allowing to be used with all
popular systems.
Key Features
* Easily plugs in between the receiver and a servo, or
between the battery and receiver, to aid in setting up
linkages
* Accurately measures current, charge current, servo
current draw and discharge current
* Precise digital LCD readout displays current or
voltage
* Allows you to locate binding and mismatched or
defective servos
* Monitors charge voltage for peak charging and cut-off
point for discharging
* Universal connector with 9-inch leads |
|
|
Digital Current Meter
# HAN172
$39.99 |
|
|
|
